|
|
- 3D-Center MCS Consulting GmbH
3D Center offers 3D scanning by means of laser technology. The website is only available in German.
http://www.3d-scancenter.de
- a.p. microelectronic
Research - development - production of electronics
ECUs for Power Trunk Lits or Power Lift Gates, Roofs, Seats, Mirrors, Lighting for Exterior and Interior, Fluel Level Measurement, Ultrasonic Sensoric Systems, Hall Sensoric Control
http://www.ap-micro.de
- Astro-Netics Inc.
Astro-Netics is an industry leader in automotive development tooling, component, and system products.
http://www.astro-netics.com
- B+S MULTIDATA
For more than 20 years B+S MULTIDATA has been developing and producing highly integrated mobile data acquisition and analysing systems near Munich, Germany. The INTEGRA offers a range of features that guarantee a comfortable data acquisition. In addition we offer our customers data acquisition software and sensors as well as various services like calibration, service and equipment rental.
http://www.bs-multidata.de
- BEP Europe
Supplier of test and production equipment for the automotive industry.
End-of-line equipment for wheel-alignment, headlamp-aiming, roll and brake-test rig, rattle machines, audit rolling road with access to drive-shaft.
Our end-of-line solutions are custom built for high-volume production-lines but also include standardised machines as well as low-cost solutions for low-volume or CKD car-plants.
Robotic applications include operatorless tie-rod setting for wheel-alignment, robotic cell for wheel-assembly (soaping, matching and fitting of tyres on rims) called TRIOBO.
Other products: Emissions Testing, Mileage Accumulation, Climatic Wind Tunnels, NVH, EMC, and also special Powertrain Dyno
http://www.bepco.com
- burster gmbh & co kg
Precision, quality and flexibility – the key to success for the family owned business. The company evolved over the last four decades to become one of the leading manufacturers for specialized applications in the fields of precision measuring instruments, calibrators and sensors for mechanical measurements. An innovative team of engineers has created a wide range of test and measurement products for solutions in quality control, R+D and production automation applications. In some fields of measurement technique burster advanced the development and making of basic technology and trendsetter essentially and therefore provides its customers with an affluent treasure of product and application know how. The high level of the in-house production facility in Germany guarantees long lasting quality products for our customers. Through our worldwide representative network we try to serve you with the best solutions providing up-to-date technology to match your application demands.
http://www.burster.de
- Cetra Metaal BV
Sheet Metall products (0,1-5,0 mm), coating, Assembly, The Netherlands/Rumania, complex sheet metall parts, sight parts (Alu)
http://www.cetra.nl
- Dietz Sensortechnik
DIETZ SENSORTECHNIK is an independent supplier of electronic sensors for automation purposes, national and international. We develop, manufacture and sell sensors for different ranges of application. Our products are inserted in different branches of industry, e.g automobile industry, special machine construction, supply and mounting technique, factory automation and many more…
http://www.dietz-sensortechnik.de
- eCon Engineering Ltd.
Along with ANSYS distribution we volunteer to carry out simulations, analyses, professional works and product developing on various fields of mechanical application.
http://www.econengineering.com
- EDIXIA
Edixia is offering machine vision based turn key inspection systems. Product highlights are Gap & Flush measuring systems for car bodies in white or finished; available as a hand held inspection tool or a fully automated inspection tunnel for hundereds of measurement points within production cycle time.
http://www.edixia.fr
- ELEKTROBIT GROUP Plc
Products and Services: Elektrobit specializes in technology engineering - the design, life-cycle testing and production automation of electronic products.
http://www.elektrobit.com
- emz Elektromanufaktur Zangenstein Hanauer GmbH & Co. KG aA
Elektromanufaktur Zangenstein Hanauer GmbH & Co. KG aA designs and manufactures electromechanical and electronic components, assemblies and systems as well as customer specified problem solutions.
http://www.emz-hanauer.de/public_main_modul.php?page_id=220&document_id=21
- EPIQ group
Welcome to the EPIQ group, your partner for customer specific design and development of electronics.
EPIQ offers a wide variety of integrated services, ranging from product development to mass production. We manufacture, finish and test printed circuit boards.
EPIQ produces, finishes and assembles injection molded plastic parts and supplies complete systems and subsystems. If requested, EPIQ is taking care of the required research and development (R&D), engineering and logistic management, including JIT and SILS supply.
http://www.epiq.com
- ESYTEC Energie- & Systemtechnik GmbH
ESYTEC Energie- & Systemtechnik GmbH is a producer, developer and service provider in the fields of internal combustion engine related measurement technologies and sensor applications, optical measurement technologies, soot diagnostics, particle characterization, combustion and heat technology.
http://www.esytec.de/englisch/index_engl.htm
- Falcon-Vision ZRt.
Falcon-Vision is developing and manufacturing image-processing based inspection systems mainly for the automotive industry. The systems carry out 100% real-time quality control of mass products.
http://www.falcon-vision.com
- FERRAZZA SRL
Innovative Technology for battery manufacturers world wide. Our service is based in Italy and provides turnkey electrical engineering and know-how consultancy including electric and electronic manufacturing from the lay-out till the final product as well as hardware and software installation of our applications. We develop customized automation for: expanded and pasting lines; assembly lines; water tank formation systems; acid recirculation systems; finishing lines; air and water treatment; acid dilution systems; machinery revamping; PLC Software development; field quality control instruments.
http://www.ferrazzanet.com
- FLEXIVA automation & Robotik GmbH
Automation and steering solutions, robotic, robcad constructions, robot cells, switchgear constructions and production, electrical engineering, software sps and ipc, fuel cell solutions
http://flexiva.de
- Fraunhofer-Institut für Produktionstechnik und Automatisierung (IPA)
The object of the research and development projects is to identify and exploit potential for automation and rationalization at companies in order to strengthen their international competitiveness and create new employment opportunities with more cost-effective and environmentally friendly production processes and improved products.
http://www.ipa.fhg.de/english/index.php
- Fries Research & Technology GmbH - FRT SÜD
We are developing, manufacturing and selling surface measurement systems for non-contact and non-destructive measurement of any kind of surfaces to analyse roughness, contour, topography, step heigt, profile, film thickness, total thickness variation, roundness,bow, warp, angle and more.
http://www.frt-gmbh.com/en/index.html
- GÖPEL electronic GmbH
Intelligent Automotive Test Solutions® – the trademark of GÖPEL electronic.
The company’s measurement and test systems are controlled using GPIB, RS 232, VXI, VME, PCI and PXI buses and are highly flexible in software and hardware to cover a wide range of applications.
http://www.goepel.com/index.php?id=109&L=1
- GUARDUS Solutions AG
The Guardus Manufacturing Execution System (MES) is a computerized solution for management and efficient control of decentralized production units and organizational structures. The solution is a homogeneous platform for the integrated collection, visualization and management of all quality and production data.
http://www.guardus.de/typo3/index.php?id=200&L=2
- H. Heinz Meßwiderstände GmbH
The H. Heinz Meßwiderstände GmbH operates in the field of temperature and humidity measurement. Based on its existing product range, the company develops and produces custom-designed measuring solutions or complete systems.
http://www.heinz-messwiderstaende.de/
- HAGE Sondermaschinenbau GmbH & Co KG
HAGE designs and manufactures sophisticated Special Purpose Machines, Fixtures, Tooling and complete Production Lines.
http://www.hage.at/estart.htm
Pages: 1 2 3 [>>]
|
|
